NEW

VZ-023
phyCAM-L mini FPD-Link III 
Starter Kit

Development kit suitable for all phyCAM-M mini cameras

  • Can be combined with all phyCAM-M mini cameras
  • Adds a transparent FPD-Link III transmission channel
  • Includes serializer backplane, deserializer and accessories
  • Connection to all imaging boards with phyCAM-M input

26mm x 18mm / 34mm x 68mm

universal

Starter kit for easy setup of phyCAM-L mini cameras

The phyCAM-L mini starter kit makes it possible to expand any phyCAM-M mini camera with the phyCAM-L interface. This kit combines a small size with a single-wire camera cable up to 15 m long. It contains all the necessary components to upgrade a phyCAM-M camera system to the phyCAM-L interface.

Kit contents:

  • phyCAM-L mini backplane VZ-023 with FPD-Link III interface
  • phyCAM-L to phyCAM-M converter board VZ-018
  • phyCAM-L coaxial cable RG1.37 (1 m length) with UMCC Gen.1 connectors
  • phyCAM-M cable for connecting the converter board to an embedded imaging kit
  • Fastening material for the backplane
  • Instructions and reference circuit diagrams

Note: For operation, a phyCAM-M (mini) camera and an embedded imaging kit with phyCAM-M camera input are required. Please order suitable Products order too!

Characteristics:

  • Compact integration: The serializer backplane fits exactly behind a phyCAM-M mini camera and is easily connected to the integrated phyCAM-M pigtail. Mounting material is included in the kit.
  • Powerful connection: The phyCAM-L interface connects the camera module and the converter board via a single coaxial cable with a length of up to 15 m. Thanks to Power-over-Coax, no additional power supply cable is required.
  • conversion: The VZ-018 converter board provides conversion to MIPI CSI-2 on the receiving side. It can be easily connected to a compatible embedded imaging kit.
  • Power supply: The camera module is powered via the phyCAM-M interface or, if required, externally on the converter board. A highly flexible coaxial cable of type RG1.37 is particularly suitable for internal device wiring and can be connected directly to the UMCC Gen.1 sockets on the camera module and converter board. Pigtail adapters for other cable types are available as accessories.
  • Flexibility: phyCAM-L mini camera modules are available with different lenses. Let us put together your individual camera module.

phyCAM-L interface: The phyCAM-L camera interface is based on the FPD-Link III standard from Texas Instruments and enables cable lengths of up to 15 m between the camera module and the computer board. The coaxial cable serves as a data channel and for power supply. Data is transmitted using the proven FPD-Link III protocol. The phyCAM-L module can also be optionally equipped with the industrial interface variant V³Link. It offers expansion options for lighting or lens control and is particularly suitable for internal device cabling.

Easy integration: A kit with a receiver board (VZ-018) is available for development, which can be connected to all processor boards with a phyCAM-M MIPI CSI-2 interface. The receiver board converts the image data into the MIPI CSI-2 format and supplies the camera module with power (Power-over-Coax). The design documentation in the kit makes it easier to integrate the receiver circuit into your own designs.

Interface (Board Level Camera) phyCAM-M (MIPI CSI-2)
Interface (Line) phyCAM-L (FPD-Link III or V³Link)
Line Rate FPD-Link III / V³Link 4.0 Gbps
Line Rate phyCAM-M 4-lane with max. 1.6 Gbps per lane
Serializer DS90UB953 (FPD-Link III) / TSER953RHBT (V³Link)
Power Supply Power over Coax
Operating Voltage (Line) 5…12 V DC
Supply Voltage phyCAM-M 3.3 V
Power Consumption (typ.) 600 mW + Camera Module + Extentions (optional)
Power rating camera port 2.4 W max
Expansion Connector Supply Voltage, I²C-Interface, Trigger, Strobe
Operating Temperature -25°C…+85°C (depending on model)
PCB Dimensions 26 mm x 18 mm
Base Order Code VZ-023
Interface (Line) 2 x phyCAM-L (FPD-Link III or V³Link)
Interface (out) phyCAM-M (MIPI CSI-2)
Line Rate FPD-Link III / V³Link 4.0 Gbps per Rx-Port
Line Rate phyCAM-M 4-lane, up to 1.6 Gbps per lane
FPD-Link III Deserializer TI DS90UB954 (FPD-Link III)
Features Power over Coaxial
Operating Voltage 5 V … 12 V DC
Power Consumption (max.) 1200 mW
Operating Temperature -25°C … +70°C
Connector Type (Signal in) 2 x UMCC Gen.1, coaxial
Connector Type (Signal out) FFC/FPC 30 pin, 0.5 mm pitch
PCB Dimensions 34 mm x 68 mm

VZ-023 phyCAM-L mini FPD-Link III Starter Kit

Didn't find an answer? Just ask your question in Live Chat

VZ-023: phyCAM®-L mini Development.Kit

Item No. VZ-023-KIT

Add-on Item number Price Order
phyCAM-L, FPD-Link III cable 2.500 mm (UMCC to UMCC, Coax)WK5277.40 plus VAT.
phyCAM-L, FPD-Link III cable 5.000 mm (UMCC to UMCC, Coax)WK5287.80 plus VAT.
phyCAM-L, FPD-Link III cable 7.500 mm (UMCC to UMCC, Coax)WK5168.00 plus VAT.
phyCAM-L, FPD-Link III cable 100 mm (UMCC to FAKRA, Coax)WK53610.00 plus VAT.
phyCAM-L, FPD-Link III adapter 105 mm (UMCC to SMA, coax)WK5379.00 plus VAT.

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Our embedded experts are there for you!

 

Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.