VM-016
phyCAM-L
1 MPixel board-level camera with FPD-Link III interface and mini-coaxial socket
- 1 megapixel sensor AR0144 monochrome / color
- Signal transmission up to 15 m
- A coaxial cable for data and power supply
- Single-board camera for industrial series use
- FPD-Link III transmission
- Optimized for internal and external use
- Easy connection to MIPI CSI-2 receivers

34 mm x 34 mm

1 MP global
Enabling new reach
With the new camera interface phyCAM-L, Phytec solves the problem of length restrictions of the MIPI CSI-2 interface. If the MIPI CSI-2 allows a maximum of approx. 15 cm between the camera module and the processor board, up to 15 m can be bridged with the phyCAM-L. By using sub-miniature plugs and a single-board solution, phyCAM-L is very compact and inexpensive.
The flexible coaxial cable is both a data channel and a power supply at the same time. Another cable is not required. The data is transmitted using the FPD-Link III protocol, which has been tried and tested in the automotive sector. The camera module even offers a plug connection for extensions.
A special feature of phyCAM-L is that the system is also particularly suitable for internal cabling. This can be done with a millimeter-thin, inexpensive RG1.37 cable. External connections can be tailored to the task using pigtail adapters.
Brilliant performance
The AR0144 sensor from Onsemi enables excellent image recording at a frame rate of 60 Hz. The global shutter also depicts fast-moving subjects without distortion. The 1 megapixel camera has an integrated dynamic defective pixel correction and an automatic exposure control unit.
The camera module is available with a monochrome or color sensor. The wide temperature range and long-term availability enable the design of professional embedded vision solutions.
Easy integration
A kit with a receiver board is available for development, which can be connected to all processor boards with a phyCAM-M (MIPI CSI-2) interface. The receiver board converts the image data back into the MIPI CSI-2 format and supplies the camera module with power (Power-over-Coax). The kit includes design documentation that makes it easy to integrate the receiver circuitry into your own designs.
Autofocus integration
An autofocus function can be implemented with a customer-specific add-on board (eg Demonstrator Board VZ-019) and a corresponding algorithm. The plug-on board is optionally available with a driver for Corning Liquid Lenses. The focus of the lens can then be adjusted by software via the I²C interface.
Product presentation of the VM-016: phyCAM-L at Embedded World 2022
Resolution | 1280 x 800 (1 MPixel) |
Color/Monochrome | -COL / -BW |
Color Format (-COL/-BW) | Bayer Pattern / Y |
Interface | phyCAM-L (FPD-Link III) |
Image Sensor (-COL/-BW) | AR0144 |
Sensor Size | 1/4" 3.84 mm x 2.4 mm |
Pixel Size | 3 µm x 3 µm |
Shutter Type | Global |
Frame Rate (full-size image) | 60 fps (max.) |
Frame Rate (Standard Video) | 66 fps (HD) |
Dynamic Range | 63.9 dB |
Features (optional) | Strobe / Trigger / EEPROM |
Operating Voltage | 4.5-13.2 V DC |
Connector Type (Signal) | UMCC Gen1, Coaxial |
Operating Temperature | -25°C…+85°C (Junction) |
Lens Mount | plain sensor / M12 / C-CS |
Lens | optional, customizable |
PCB Dimensions | 34 mm x 34 mm |
Sensor Technology | CMOS, Backside Illumination |
Sensitivity | 3.6 V/lux·sec (BW), 3.1 V/lux·sec (COL) |
AEC | auto / manual |
AGC | auto / manual |
Chief Ray Angle | 0° |
ROI | yes |
Skipping | 2 / 4 / 8 / 16 |
Binning | yes |
Mirror / Flip | yes |
Control Interface | I²C |
Interface Data Width | 8/10/12 Bit |
Special Feature | I2C/ Power/ Strobe-Connector |
Connector Type Trigger / Sync. | JST 3 pin |
Mounting Points | 4 x M2.5 |
If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32
Our embedded experts are there for you!
Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!
Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!
Participants in our training courses receive a solid knowledge of professional hardware and software development.
Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.
You will get a free insight into new hardware and software solutions and learn more about special offers.
Other interesting topics: