PCAN CAN-Repeater

CAN products are now available from PHYTEC
Embedded Pvt.Ltd. Call us at


The PEAK PCAN-AU5790 bus converter establishes a connection between a high-speed CAN bus (ISO 11898-2) and a single-wire CAN bus (SAE J2411). One of the most important potential applications of the bus converter is a simple connection between a PCAN series CAN interface (e.g. PCAN-USB) and a single-wire CAN bus.


  • Philips AU5790 Transceiver (others available on request)
  • Adapter features a plastic housing
  • Transfer rates up to 125k Baud
  • Operating modes can be switched for the Single-wire CAN side via a sliding switch.
  • Operating mode LED

Whats Included?

  • Adapter in plastic casing
  • Manual in PDF format

Technical Details

Interface CAN Power Environment Mechanical
CAN: D-Sub 9 pin - CiA® 102 SPECIFICATION: High-speed: ISO 11898-2; 2.0A (standard format) and 2.0B (extended format) SUPPLY VOLTAGE: +5 V DC, at least 150 mA (via HS-CAN port); +12 V DC additionally (via SW-CAN port), if available current strength of the 5 V supply < 150 mA OPERATING TEMPERATURE: 0°C to 70°C (32°F to 158°F) HOUSING: plastic casing
Wake-up LED (yellow): Pulse width: > 0.5 s; Time delay signal: > 5 μs (at 11 V pulse); Threshold signal: > 8.2 V SPECIFICATION: Single-wire: SAE J2411 POWER CONSUMPTION: 20 mA average, 120 mA maximum STORAGE TEMPERATURE: -40°C to 125°C (-40°F to 257°F)STORAGE TEMPERATURE: -40°C to 100°C (-40°F to 212°F) ADAPTER DIMENSIONS (L x W x H): 63 x 34 x 19 mm
BIT RATE: High-speed: 83.3 kbit/s HUMIDITY: 15% to 90% (non-condensing)HUMIDITY: 15% to 90% (non-condensing)
BIT RATE: Single-wire: 33.3 kbit/s EMC: EN 55024:2011-09; EN 55022:2011-12; EN directive 2004/108/EG
TRANSCEIVER: High-speed: NXP (Philips) PCA82C251
TRANSCEIVER: Single-wire: AU5790 or compatible
TERMINATION: High-speed: 120 Ω (unalterable)
TERMINATION: Single-wire: 5.1 kΩ

Pricing plus VAT

Part #: IPEH-002040
PCAN CAN-Repeater $175.00

Documentation & Software