The phyCORE-AM64x SOM is Insert-ready communication module for Industrial Control and Smart Manufacturing applications and it is is a robust and reliable embedded solution designed for headless industrial communication systems. Due to the heterogeneous architecture of the TI AM64x processor, you can run the majority of your application using Linux and off load critical components to the specialized low latency best-in-class real-time coresThe 50 mm x 37 mm SOM has an extensive 280-pin interconnect supporting common factory communication protocols such as CAN, EtherCAT, UART, I2C but also automation specific interfaces such as EPWM, ECAP, and EQEP.
Rapid Development Kit
In conjunction with the launch of the phyCORE-AM65x SOM, PHYTEC also introduced the phyCORE-AM65x Rapid Development Kit – a new kit that helps customers get started on integrating PHYTEC hardware and software with customer software and product designs. With the launch of the phyCORE-AM65x SOM and development kit, PHYTEC offers a complete line of high-quality, reliable, and scalable products based on the Texas Instruments AM65x processors.
Initial samples for the phyCORE-AM65x System on Module will be available in Q1 / Q2 2019 for selected projects
Highlights
- Quad ARM® Cortex™-A53 CPUs and dual-core ARM® Cortex™-R5F MCU subsystem
- 3D Graphics support via PowerVR SGX544 Core
- Up to 6 Gigabit Industrial Communication interfaces (PRU-ICSSG)
- Single Lane PCIe 3.0
- OctoSPI Bus Support
- USB 3.0 Dual Role
- USB 2.0 Dual Role
- CSI Camera Support
- LVDS Display Support
- MIPI DPI Display Support
- DDR4 RAM with support for discrete DDR4 ECC
- Up to 32 GB eMMC
- Optional 2.4 or 5 GHz certified WiFi
- 1x 10/100/1000 Mbit/s Ethernet PHY on SOM
- SOM dimensions: 55 x 65 mm
- Linux, Android and TI-RTOS BSP
PHYTEC modules support comprehensive security features in hardware and software. All functions supported by the AM65x processor as well as further information about our security concept can be found here.
Technical Details
| Feature | phyCORE-AM65x | Alpha Development Kit | |||
|---|---|---|---|---|---|
| Product | SOM | Development Kit | |||
| Architecture | ARM Cortex-A53 / ARM Cortex-R5F | ARM Cortex-A53 / ARM Cortex-R5F | |||
| Processor | TI AM6548 | TI AM6548 | |||
| Frequency |
1.1 GHz (A53) / 400 MHz (R5F) |
1.1 GHz (A53) / 400 MHz (R5F) |
|||
| Graphics |
3D GPU (PowerVR SGX544) |
3D GPU (PowerVR SGX544) |
|||
| MEMORY | |||||
| DRAM |
2 GB default / 1 GB opt DDR4 ECC |
2 GB DDR4 + 1 GB ECC |
|||
| eMMC |
4 GB default / 32 GB max |
4 GB | |||
| EEPROM | 4 KB | 4 kB | |||
| INTERFACES | |||||
| Ethernet |
1x 1 Gbit/s, up to 6x RGMII via PRU-ICSSG |
3x 1 Gbit/s | |||
| USB |
1x USB3.0, 1x USB2.0 Dual Role |
1x USB3.0, 1x USB2.0 Dual Role |
|||
| UART | 5x | 1x 2×5 General Purpose UART Header, 1x FTDI to UART via Micro USB | |||
| CAN | 2 | 2x5 CAN Header | |||
| PCIe | 2x 2.0 | 1x | |||
| I²C | 6x | 2x | |||
| SPI/SSP | 4x MCSPI, 2x OSPI | 1x OSPI NOR | |||
| SD/SDIO/MMC | 1x SDIO (1x on-board for eMMC) | 1x for eMMC / 1x to switch for either SOM Wifi or SD Card | |||
| PWM | 6x | 1x | |||
| A/D | 4x 12-bit channels | - | |||
| GPMC | yes | - | |||
| Display | 1x MIPI-DPI, 1x OLDI (LVDS) | 1x LVDS | |||
| Touch | Yes | ||||
| Audio | 3x McASP | - | |||
| Camera |
1x MIPI CSI, 1x Parallel |
1x MIPI CSI-2 | |||
| RTC | Yes (on-board via I²C) | Yes | |||
| Power supply | 3.3 V | 3.3 V | |||
| Dimensions | 55 x 65 mm | ||||
| Connector | Samtec 0.5 mm pitch (2x 90 pins) | Samtec 0.5 mm pitch (2x 90 pins) | |||
| Temperature range | -40° to +85° C | -40° to +85° C | |||
| SOFTWARE | |||||
| Operating system | Linux | Linux | |||
| Distribution | Yocto 2.4 (Rocko) | Yocto 2.4 (Rocko) | |||
| BSP / Image | BSP-Yocto-TISDK-AM65xx-ALPHA1 | BSP-Yocto-TISDK-AM65xx-ALPHA1 | |||
| Kit Content | phyCORE-AM65x System on Module, Carrier Board, USB Standard-A to micro-AB cable, Ethernet cable, 12V/2 Amp. power supply adapter, Schematic registration card |
Pricing plus VAT
| SOM | |||||
|---|---|---|---|---|---|
| SOM |
Quote |
|
|
|
|
