Particularly suitable for industrial HMI, robot control, medical devices or building automation.

  • Single, dual or quad core cortex®-A53 (up to 1,4GHz)
  • 1x isolated cortex®-M4F MCU (up to 400MHz) for general purpose, security and protection
  • Dual display support with 24-bit RBG parallel interface and OLDI/LVDS 4-lane x2, up to 200 MHz pixel clock for 2K display resolution
  • Selectable GPU support, up to 8 GFLOPS, for better graphics performance
  • Camera interface (1x MIPI CSI-2 v1.3)
  • Programmable Realtime Unit (PRU) support
  • Two Gigabit Ethernet interfaces (1x via PHY, 1x as RGMII)
  • A variety of industrial interfaces (e.g. 8x UART, 4x SPI, 5x I2C, 2x USB 2.0, 3x CAN FD, 3x eMMC and SD, 3x McASP for audio) are available
  • Dedicated central system controller for security, power and resource planning
  • Support for multiple power saving modes (e.g.: deep sleep, standby, MCU only) enable battery powered applications

43 mm x 32 mm

ARM Cortex-A53/M4F

The phyCORE-AM62x module is the continuation of the phyCORE-AM335x family. The processor offers ultra-low power modes, dual display, multi-sensor edge computing, security and other BOM-saving integrations. The phyCORE module targets a wide range of applications such as industrial HMI, PLC/CNC/robot control, medical devices, building automation and more.

Hardware Developer Sam Wilson shows the phyCORE-AM62x SOM and Single Board Computer.

The charging station demo with phyCORE-AM62 module explained by True Loan.

Processor AM62x
Architecture ARM Cortex-A53 / Cortex-M4F, PRU-ICSS
Frequency up to 1.4 GHz
eMMC 32 GB
RAM 2 GB default / 4 GB maximal
Ethernet 2x Gigabit (1x on-board PHY/ 1x RGMII)
USB 2x 2.0
I²C 6x
Display 24-bit RBG parallel, OLDI/LVDS-4 lane x2
Audio 3x MxASP
Camera 1x CSI-RX-4L
External Memory Bus 1x GPMC
eCAP yes
eQEP yes
ePWM yes
RTC yes
Connectors Samtec 0.5 mm pitch (2x 2x60-pin)
Dimensions 43 mm x 32 mm
Temperature range -40 °C to +85 °C
Operating system Linux (Yocto based)

Didn't find an answer? Just ask your question in Live Chat


Item No. PCM-071

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Visit our Online showroom with trends and innovations almost as if you could touch them!


Take a quarter of an hour and take a look at our new products and technologies with one of our embedded experts - filmed live with two cameras and shown in person!

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!


Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.