READY TO EMBED

USB-CAM151H
USB camera

Stand-alone camera for professional use.

  • Monochrome
  • 5 MPix
  • CMOS sensor MT9P031
  • Rolling shutter
  • C / CS mount

36 mm x 36 mm

5 SM

The industrial cameras of the USB-CAM series can be connected to any PC with a USB interface in just a few steps. A complex installation of additional hardware is not necessary. Power supply and data transfer take place via just one cable.

Thanks to the extremely compact metal housing with a size of only 36 x 36 x 25 (mm), the USB-CAMs can be installed in almost any installation location. It is fastened using four M3 threads or a supplied 1/4 "or M6 flange. The fastening holes are located on all four sides of the camera, so that even difficult installation situations can be mastered.

In practice, cameras with different resolutions are required depending on the task at hand. Previously, different camera models had to be selected and stocked for this.
The 5 megapixel camera from PHYTEC simplifies the selection:
Various sub-resolutions can be selected via software. In this way, the USB-CAM can be easily adapted to a wide variety of tasks.
A lower resolution can be achieved either by setting a readout window (ROI) or by combining pixels (binning).

The camera can be operated under Microsoft Windows10 and Linux. To use the cameras under Linux, please order using the "-UVC" option (example: "AK091-UVC").

As an option, the camera is also available with an external trigger input with which the recording time can be precisely controlled.

-Trigger cable USB-CAM (Hirose 4-pin to BNC): WK297 (Length = 3m)

Resolution 2592 x 1944 (5 MPixel)
Color / Monochrome monochrome
Shutter Speed 1/10.000 ... 1/4 sec
Interface USB 2.0 High Speed
Image Sensor (-COL/-BW) MT9V024
Sensor Size 1/3“ 4,51 mm x 2,88 mm
Pixel Size 6 µm x 6 µm
Shutter Type global
Frame Rate (full-size image) 60 fps
Frame Rate (Standard Video) 150 fps (QVGA)
Dynamic Range > 55 dB (linear)
Features (optional) external Trigger, Digital Out
Operating Voltage 5V via USB
Power Consumption (typ.) 1.25 W
Connector Type (Signal) USB 2 Mini-B
Operating Temperature -5°C ... 45°C
Lens Mount C/CS-Mount
Dimensions 36 mm x 36 mm x 25 mm
Sensor Technology CMOS
Sensitivity 4.8 V/lux·sec
AEC yes
AGC yes
AWB yes
Chief Ray Angle
ROI yes
Binning yes
Interface Data Width 8 Bit
Data Format (Software) Y8
Connector Type Trigger / Sync. Hirose HR10A-7R-4P (female)
Mounting Points 1/4" and M6x8 on all sides
Weight 70 g

USB CAM-151H, Linux

Item No. AK093-UVC

USB-CAM-151H, Windows 10

Item No. AK093

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Our embedded experts are there for you!

 

Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.