READY TO EMBED

phyCORE®-i.MX 8X
ARM Cortex ™ -A35 / -M4F

The phyCORE-i.MX 8X System on Module combines high performance with low power consumption.

  • Energy efficient design
  • HiFi 4 audio DSP
  • SE050 NXP Security Chip
  • Optimal EMC properties
  • 3x CAN / CAN FD
  • 2x LVDS
  • Less circuit effort due to 3,3 V power supply and appropriately programmed PMICs
  • MIPI CSI and camera parallel

52 mm x 42 mm

ARM Cortex-A35 / -M4F

The phyCORE-i.MX 8X System on Module combines high performance with low power consumption. It was designed with a view to a favorable price / performance ratio and for use in a wide range of control tasks. Thanks to the industrial interfaces such as CAN, the phyCORE-i.MX 8X System on Module is suitable for common industrial applications.

Processor i.MX 8DualX / i.MX 8DualXPlus / i.MX 8QuadXPlus
Architecture ARM Cortex-A35 / Cortex-M4F
DSP Tensilica HiFi 4 DSP with 666 MHz
Bit width 64 bit
Frequency up to 4x 1.2 GHz + 264 MHz
Graphics 3D GPU (Vivante GC7000 Lite)
Video H.265 dec 4k, H264 enc/dec 1080p
Security SE050 NXP Security Chip, AES, 3DES, RSA, ECC Ciphers, SHA1/256, TRNG
SPI NOR Flash 64 MB - 256 MB (Octal SPI/Dual SPI Flash)
eMMC 4 GB - 128 GB
NAND Flash 128 MB - 1 GB (NAND or eMMC)
LPDDR4 RAM 1 GB - 4 GB
EEPROM 4 kB
Ethernet 2x 10/100/1000 Mbit/s (1x onboard / 1x RGMII)
USB 1x USB 3.0 OTG, 1x USB 2.0 OTG
UART 2x
CAN 3x CAN-FD
PCle 1x PCIe 3.0
I²C up to 10x
SPI/SSP 1x Octal SPI or 2x Quad SPI + 3x SPI
MMC/SD/SDIO 1x (only with eMMC)
PWM 4x
A/D 6x
Display 2x LVDS or 2x MIPI DSI, Parallel
Camera 1x MIPI CSI, 1x 8-bit/10-bit parallel CSI
Audio 1x ESAI
RTC Low power, high precision external RTC
Power supply 3.3 V
Connectors Samtec 0.5 mm pitch (280 pins)
Dimensions 52 mm x 42 mm
Temperature range -25 °C to +85 °C
Operating system Linux (Yocto based), QNX (by BitCtrl)

phyCORE®-i.MX 8X

phyCORE®-i.MX 8X

Item No. PCM-065

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

SBC's + Development Kits _ The right carrier boards for the module

Our embedded experts are there for you!

 

Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.