VM-009
phyCAM-S +

This camera board can be connected directly to a controller board with an LVDS camera interface.

  • Color sensor
  • 1,3 Megapixel
  • CMOS sensor MT9M131
  • Rolling shutter

Discontinued
LTB: 09.04.2021/XNUMX/XNUMX

Alternative camera module VM-016: phyCAM-S +

34 mm x 34 mm

1,3 MP rolling

The VM-009-LVDS camera board is equipped with the Aptina MT9M131 color CMOS sensor.
This sensor has an integrated preprocessing (IFP - image flow processor), which enables image correction and enhancement.
The SOC architecture also enables the conversion of data formats. This means that six different 8-bit data formats are available.
The VM-009-LVDS supports the direct output of RGB, YUV and Bayer pattern formats. 

The camera board is equipped with the serial phyCAM-S interface. It can be connected directly to a controller board with an LVDS camera interface. PHYTEC offers this interface for controller boards of the phyCARD and phyFLEX families. The corresponding base boards are already equipped with the appropriate connector. On the software side, the corresponding camera drivers and demo programs for various PHYTEC controller boards are provided directly in the BSP.

The camera board can be supplied in three different housing variants: As a sensor board, with an M12 lens holder or with a C / CS mount bracket.

Resolution 1280 x 1024 (1.3 MPixel)
Color/Monochrome -COL
Color Format (-COL) YUV, RGB, Bayer Pattern
Interface phyCAM-S (LVDS)
Image Sensor (-COL/-BW) MT9M131
Sensor Size 1/3" 4.6 mm x 3.7 mm
Pixel Size 3.6 µm x 3.6 µm
Shutter Type Rolling
Frame Rate (full-size image) 15 fps (max.)
Frame Rate (Standard Video) 30 fps (VGA)
Dynamic Range 71 dB
Features (optional) Strobe / EEPROM
Operating Voltage 3.3 V DC
Power Consumption (typ.) 170 mW
Power Consumption (max.) 538 mW
Connector Type (Signal) Hirose 8 pin.
Operating Temperature -25°C…+70°C
Lens Mount plain sensor / M12 / C-CS
Lens optional, customizable
PCB Dimensions 34 mm x 34 mm
Sensor Technology CMOS
Sensitivity 1.0 V/lux·sec
AEC auto / manual
AGC auto / manual
AWB auto / manual
Gamma Correction yes
ROI yes
Skipping 2 / 4
Mirror Flip yes
Control Interface I²C
Interface Data Width 8 Bit
Data Format (Software) YUV,RGB-565, RGB-555, RGB-444, Raw RGGB Bayer,
Processed RGGB Bayer, ITU-R BT.656
Special Feature integrated ISP
Connector Type Trigger / Sync. JST 3 pin
Mounting Points 4 x M2.5
Weight (PCB) 7 g

VM-009: phyCAM®-S+, color, PCB version

Item No. VM-009-COL-LVDS

VM-009: phyCAM®-S+, color, S mount

Item No. VM-009-COL-LVDS-M12

VM-009: phyCAM®-S+, color, C/CS mount

Item No. VM-009-COL-LVDS-H

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Our embedded experts are there for you!

 

Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.